Introduction of KT60
1.  For checking and setting ignition timing on automotive, agricultural and marine engines.
2.  For use on 9~16 volt systems.
3.  Reverse polarity protected.
4.  Accurate to 8, 000rpm.
5.  150cm long durable power leads.
6.  Impact resistant housing.
7.  On/off trigger switch.
8.  Bright linear Xenon flash tube for daylight use.
9.  Focused lens provides concentrated light.
 


a. Display Area: Display ignition advance angle or engine speed.
b. Indicator Area: Indicates that the product is in a certain functional state.
c. Operation Buttons:
"R/A"button: to switch speed and ignition advance angle to be displayed; 
"4/2"button: to switch 4-stroke and 2-stroke;
"+"button:short press to increase ignition advance angle by 0.1 and long press to increaseby 1; "-"button:short press to reduce ignition advance angle by 0.1 and long press to reduce by 1.











 Operating Instructions
1.  Clamp the inductive pick-up around the No.1 Spark Plug wire. Make sure the arrow on it is facing towards the spark plug. Do not allow the inductive pick-up to touch the exhaust manifold or surrounding parts as these areas become extremely hot and will damage the inductive pick-up.
2.  Connect the RED clamp to the positive (+) battery terminal.
3.  Connect the BLACK clamp to a secure engine ground such as the alternator bracket or the engine block. For safety reasons, do not use the negative (-) battery terminal or fuel system components as a ground connection point.